[kwlug-disc] intermittent NIC?
john at netdirect.ca
john at netdirect.ca
Thu Nov 19 06:57:29 EST 2009
It sounds like you have a bad nic. If its a problem with autonegotiation you can try hard coding the settings with mii-tools. If that works configure your nic with hose values. It will be a constant headache since you have to remember to change the settings if you change switches.
A $10 nic isn't a bad solution.
John Van Ostrand CTO, co-CEO
Net Direct Inc
564 Weber St. N. Unit 12
Waterloo, ON N2L 5C6
Ph: 519-883-1172 x5102
Ph: 866-883-1172 x5102
Fx: 519-883-8533
----- Original Message -----
From: Richard Weait [richard at weait.com]
Sent: 11/19/2009 06:22 AM EST
To: KWLUG discussion <kwlug-disc at kwlug.org>
Subject: [kwlug-disc] intermittent NIC?
Hunh?
I have what appears to be an intermittent NIC on a p4 motherboard.
The board was acquired as surplus some time ago for a project that
never started so this is the first time I've looked at it.
Link light appears steady for a while, then out for a while; the
duration does not appear to be a pattern, or blinking. I never see
the super-happy-blinking-lights that I expect from a healthy, active
connection. Ping tests on my local network give 40% to 75% packet
loss. Using another box on the same ethernet cable / switch port
gives the expected perfect connectivity. I see no bent pins in the
ethernet socket.
I'm tempted to use a plug-in NIC and forget the on-board NIC. Am I
missing something?
_______________________________________________
kwlug-disc_kwlug.org mailing list
kwlug-disc_kwlug.org at kwlug.org
http://astoria.ccjclearline.com/mailman/listinfo/kwlug-disc_kwlug.org
More information about the kwlug-disc
mailing list