[kwlug-disc] RAID-0 for the first time

[Rashkae]

Richard Weait wrote:

> 
> For the RAID-0, it might actually be installed and working properly,
> but df -hT reports too much capacity on the RAID drive.  In fact it
> reports roughly the sum of the capacity of the two RAID drives.  I was
> expecting roughly the capacity of one of the identical RAID drives to
> be reported as the capacity of the RAID-0 array.
> 

What you were expecting is Raid-1, (aka mirroring).  Raid 0 is a bit of 
a misnomer; there is no 'redundant' disk.