[kwlug-disc] Adding (setting up) 2nd disk.

unsolicited unsolicited at swiz.ca
Tue Jan 26 15:08:29 EST 2010


LiveCDs, etc., all boot fine.

It's once booted that things get weird.

e.g. I can chroot /dev/sda2, but then ...

grub-install, for example, kindly made the disk grub bootable, however 
didn't take it's grub.cfg along for the ride. In a chroot'ed 
environment probing the disk of / is problematic.

So grub boots, goes to read it's grub.cfg (menu.lst) file ... and it 
doesn't know where it is. Dropping me to a grub prompt. And I don't 
remember the grub.cfg (menu.lst) lines. [will print them now, though.]

I'll dig deeper with the article. Thanks.

unsolicited wrote, On 01/26/2010 3:00 PM:
> Thanks for the note. I get all this. Or I'm still missing something. The 
> instructions still seem to be putting /home and /data on different 
> partitions, not the same one.
> 
> (It's a laptop - there ain't gonna be any more disks or partitions, and 
> it isn't going to grow any. Otherwise, I probably would have used LVM.)
> 
> What I don't get is how both /home and /data are on the second disk 
> (partition actually, but never mind that), if fstab is mounting /home at 
> /dev/sda6. (When / is /dev/sda3.) How is /data on the 2nd disk set up?
> 
> Unless fstab mounts /disk2 at /dev/sda6, I create /disk2/home and 
> /disk2/data and create /home and /data as links (hard?) there.
> 
> Good search terms for such aren't occurring to me.
> 
> Thanks for any thoughts.
> 
> john at netdirect.ca wrote, On 01/26/2010 10:46 AM:
>> kwlug-disc-bounces at kwlug.org wrote on 01/26/2010 08:39:14 AM:
>>
>>> I'm setting up a kubuntu 9.10 box, 3 partitions: OS, swap, data.
>>>
>>> I would like /home and other good stuff, say /data, to be on the 
>>> second disk.
>>>
>>> How do I do this / what are the magic google terms?
>>>
>>> mount the 2nd disk as /disk2, and create /home and /data and link 
>>> them to /home and /data on the 2nd disk?
>>>
>>> Normally, one would make an entire partition as /something, like 
>>> /home. Here I want multiple /somethings on the second disk.
>>>
>>> Are there other good things that should be there too? I presume /etc 
>>> is right out, probably /usr too. /var?
>>>
>>> Good reference doc appreciated - "linux partitioning" drowns me as a 
>>> search term.
>>
>> It a fairly subtle task and might not be searchable.
>>
>> On a new install you would choose an advanced disk set up and set up 
>> partitions and mount points manually.
>>
>> If you are retro-fitting a disk then you could do a short set of 
>> simple commands (assuming /dev/sdb)
>>
>> 1. fdisk /dev/sdb # Create partitions, if they don't already exist. 
>> Keep in mind any data on the disk will be lost.
>> 2. mke2fs -j /dev/sdb1; mke2fs -j /dev/sdb2 # Create file systems.
>> 3. Edit /etc/fstab to add the new file systems, mount then on the 
>> proper destinations (i.e. /home and /data)
>> 4. mount /home; mount /data # Mount the file systems. This command 
>> will ensure that you fstab entries are correct.
>>
>> A side task might be to temporarily mount the file systems (mkdir -p 
>> /mnt/tmp; mount /dev/sdb1 /mnt/tmp) and move over the data from the 
>> existing folder (mv /home/* /mnt/tmp). Then umount and mount on the 
>> right mount point (umount /mnt/tmp; mount /home)
>> You might also consider using LVM instead of raw partitions. LVM 
>> allows you to expand file systems easily and add disks as needed. This 
>> is a little more complicated:
>>
>> 1. fdisk /dev/sdb # create one partition
>> 2. pvcreate /dev/sdb1 # Initialize the partition as a LVM Physical Volume
>> 3. vgcreate MyData /dev/sdb1 # Create the Volume Group named MyData
>> 4. lvcreate -L 20G -n home MyData # Create a 20GB volume group named 
>> "home"
>> 5. lvcreate -L 60G -n data MyData #Create a 60GB volume named "data"
>> 6. mke2fs -j /dev/MyData/home; mke2fs -j /dev/MyData/data # Create 
>> file systems on the LVs
>> 7. Edit /etc/fstab and add the file systems.
>> 8. mount /home; mount /data # Mount the file systems.
>>
>> When creating LVs you might want to consider leaving unallocated 
>> space. In other words don't assign all the disk space to LVs. Then as 
>> you use the file systems you will see where you need more space and 
>> you can re-allocate then. It's easy to add disk to an LV, it's harder 
>> to take it away.
>>
>>
>> John Van Ostrand
>> Net Direct Inc.
>>  
>> CTO, co-CEO
>> 564 Weber St. N. Unit 12
>> map
>>  
>> Waterloo, ON N2L 5C6
>>  
>> john at netdirect.ca
>> Ph: 866-883-1172
>> ext.5102
>> Linux Solutions / IBM Hardware
>> Fx: 519-883-8533
>>  
>>
>>
>>
>> _______________________________________________
>> kwlug-disc_kwlug.org mailing list
>> kwlug-disc_kwlug.org at kwlug.org
>> http://astoria.ccjclearline.com/mailman/listinfo/kwlug-disc_kwlug.org
>>
> 
> _______________________________________________
> kwlug-disc_kwlug.org mailing list
> kwlug-disc_kwlug.org at kwlug.org
> http://astoria.ccjclearline.com/mailman/listinfo/kwlug-disc_kwlug.org
> 




More information about the kwlug-disc mailing list