[kwlug-disc] (no subject)
Khalid Baheyeldin
kb at 2bits.com
Wed Feb 26 10:33:45 EST 2014
Anyone has OTA and getting PBS from Buffalo in West Waterloo? Or this
impossible?
On Wed, Feb 26, 2014 at 10:18 AM, Jason Locklin <locklin.jason at gmail.com>wrote:
> Have you put your location in TVfool? I can help you read the output.
> Can't really make a good recommendation without knowing the signal
> levels. Anywhere within a few blocks is fine, so you don't have to
> share your exact location.
> http://www.tvfool.com/index.php?option=com_wrapper&Itemid=29
> -Jason
>
> On Wed 26 Feb 2014 09:52:54 AM EST, CrankyOldBugger wrote:
> > Again, so many good points have been brought up in this discussion. I
> > seem to have hit the jackpot for ideas!
> >
> > So... if I was to go out today and buy an antenna just to see what
> > channels I can get, is there a particular make and model that you guys
> > recommend? Let's just assume for a moment that I'm willing to pay a
> > couple of extra coins for quality if it means eventually getting rid
> > of the monthly satellite TV bill (just a couple of extra coins, not a
> > lot!).
> >
> > If there isn't a clear make and model known, what sort of features do
> > I look for instead? The last time I bought an antenna it was a set of
> > rabbit ears that sat on top of the old RCA TV.....
> >
> Have you put your coordinates into TVfool? I could help you read the
> output. Can't really make a good recomendation without knowing what the
> signal levels are. Anywhere within a couple blocks is fine, so you
> don't have to share your exact address.
> http://www.tvfool.com/index.php?option=com_wrapper&Itemid=29
>
> -Jason
>
> > If I can't get any stations over the antenna in my location then I'm
> > just going to take it back to the store, so obviously I would prefer
> > to deal with a reputable dealer.
> >
> >
> >
> >
> > On 26 February 2014 09:40, Jason Locklin <locklin.jason at gmail.com
> > <mailto:locklin.jason at gmail.com>> wrote:
> >
> > * In regards to two antennas: It's tricky, but it can work, it's
> > called
> > "stacking" in OTA parlance:
> > http://overtheair.saveandreplay.com/Antenna_Stacking_Ganging.asp
> >
> > Generally, it's tricky to keep signals from both antennas from
> > interfering with each other because of being just slightly out of
> > phase, but it can work with a little patients. One exception, being,
> > that if you are combining signals from two different frequency
> > bands. I
> > have a VHF/UHF coupler that I plan on using to add a VHF dipole which
> > bypasses my amp, so that the local CTV on channel 6 stops overloading
> > things. The coupler only allows VHF signal from one antenna, and UHF
> > from the other, so there is no issues with phasing.
> >
> > If you are going the PVR route, such as with MythTV, and you are
> > having
> > trouble with your stacked antennas, you could run two lines down
> > to two
> > tuners. It will be slightly more expensive, but you will get much
> > better performance, and double your simultaneous recording ability.
> >
> > * Regarding TV guide information: All the Channels are broadcasting
> > guide information now, but only for 12-25 hours ahead. This works
> fine
> > with MythTV because I can set automatic recordings and even automatic
> > searches to enable recordings. If you have a PVR that requires manual
> > scheduling, it would be a pain, as you can only see a day's worth at
> a
> > time. I did have a Schedules Direct membership for a while because
> > Global didn't used to broadcast guide data at all. It was generally
> > more accurate and had about a month of data.
> >
> > * Regarding XBMC and MythTV: I have been using XBMC as a frontend for
> > MythTV for a couple years. It has never worked very well for me, and
> I
> > usually end up switching to the MythTV frontend to watch recordings.
> I
> > just have a script that alternatively starts the two programs, so
> when
> > I exit MythTV, XBMC starts, and vise versa. It's a bit slow, and I
> > thought of putting them on two different virtual desktops and
> > using the
> > window manager to flip back and forth instantly, but because they
> both
> > use graphics acceleration, there was issues. I also thought of
> running
> > two X-servers and switching back and forth, but I never got around to
> > trying that.
> >
> >
> > _______________________________________________
> > kwlug-disc mailing list
> > kwlug-disc at kwlug.org <mailto:kwlug-disc at kwlug.org>
> > http://kwlug.org/mailman/listinfo/kwlug-disc_kwlug.org
> >
> >
> >
> >
> > _______________________________________________
> > kwlug-disc mailing list
> > kwlug-disc at kwlug.org
> > http://kwlug.org/mailman/listinfo/kwlug-disc_kwlug.org
>
>
>
>
> _______________________________________________
> kwlug-disc mailing list
> kwlug-disc at kwlug.org
> http://kwlug.org/mailman/listinfo/kwlug-disc_kwlug.org
>
--
Khalid M. Baheyeldin
2bits.com, Inc.
Fast Reliable Drupal
Drupal optimization, development, customization and consulting.
Simplicity is prerequisite for reliability. -- Edsger W.Dijkstra
Simplicity is the ultimate sophistication. -- Leonardo da Vinci
For every complex problem, there is an answer that is clear, simple, and
wrong." -- H.L. Mencken
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://kwlug.org/pipermail/kwlug-disc_kwlug.org/attachments/20140226/17c7c692/attachment.htm>
More information about the kwlug-disc
mailing list