[kwlug-disc] Recommendations on ethernet cable tool sets, kits?
R. Brent Clements
rbclemen at gmail.com
Tue Jan 30 11:08:46 EST 2018
My understanding is the blades that make contact in the keystone jack are
designed to cut into solid-core wires. if your cable has a braided core it
can simply slice some of the individual copper conductors and you end up
with an unstable connection.
I made a lot of cables back in the day (i.e 10-15 years ago) when the cost
of ready-made cables was not as cheap as they are now. You may still need
to remove and replace the end of a cable if you want to feed it through a
small hole. I know the tolerances of devices are pretty good, but I would
be hesitant about patching together 3 or 4 segments with RJ45 connectors
when a single line can be run end-to-end with just a bit of work.
Brent
On 30 January 2018 at 10:18, Bob Jonkman <bjonkman at sobac.com> wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Cedric shouted:
> > 2) IF YOU ARE CRIMPING MALE RJ45 ENDS ON A CABLE, YOU ARE DOING IT
> > WONG AND SHOULD JUST STOP. INSTALL KEYSTONE JACKS AT ALL TIMES.
>
> Are there keystone jacks enclosures designed for inline cables, eg.
> not for wall-mount boxes? I would hate to give a client a "fixed"
> cable with just a keystone jack hanging off the end.
>
> - --Bob.
>
>
> On 2018-01-29 09:42 AM, Cedric Puddy wrote:
> > Hi Folks!
> >
> > Copule quick points:
> >
> > 1) Byte Brothers (I got mine from PrimeSpec) makes a cable
> > certifier that sits in between basic continuity testing and totally
> > far-gone cable certifiers -- it's about $500. It's about 95% of a
> > classy, $6k unit. The trade-offs are more in the line of terrible
> > user interface and slow, fussy workflow, but that's no big deal if
> > you aren't doing high numbers of drops. (You do a single cable,
> > you have to run back and forth connecting a terminal block on the
> > far end, then pushing buttons the near end, etc. But it definitely
> > gives you a very good read-back on whether the cable you punched
> > down was done right.
> >
> > 2) IF YOU ARE CRIMPING MALE RJ45 ENDS ON A CABLE, YOU ARE DOING IT
> > WONG AND SHOULD JUST STOP. INSTALL KEYSTONE JACKS AT ALL TIMES.
> > OK, so that's a bit strong, but seriously, I deal with lots of
> > cables, and I haven't crimped a male RJ45 end on a cable since
> > about 2003. I gave away my RJ45 crimp tools, don't carry one, and
> > neither do my techs. The reason: you cannot manually make a patch
> > cable to nearly the same spec as machines, and it is FAR more
> > reliable to attach a keystone jack; moreover the manufactured
> > cables are cheap and plentiful.
> >
> > Keystone jacks are a lot more forgiving, faster, and easy to
> > inspect/fix if there's a problem. And a shout out to Primespec --
> > I buy all this kind of stuff there; cabling is only cost effective
> > if you have a proper vendor who serves the professional cabling
> > market. Home Despot marks this stuff up "a hair too much", in my
> > experience.
> >
> > We usually sub-contract cabling, but sometimes "internal resources"
> > have to chip in. When that happens, we usually do continuity
> > testing when we install a keystone jack, and only occasionally use
> > the Byte Brothers certifier. For continuity, my absolutely
> > favourite tool is the Ideal LinkMaster Pro, with a bunch of
> > remotes. The awesome thing about this unit is that if you plug it
> > into a cable with a remote on the end, it will instantly power on,
> > test the cable, tell you if it's good within 2 seconds, and then go
> > back to sleep when you unplug the cable. I've used my for years
> > and changed the battery once, and it's just so damn fast. It does
> > a variety of things, but the "UX experience" can't be beat. No
> > idea who sells them these days, or how much.
> > https://www.google.ca/search?q=ideal+supply+cable+tester&
> source=lnms&tbm=isch&sa=X&ved=0ahUKEwiI99KDsv3YAhVs_
> IMKHb7qA3AQ_AUICygC&biw=1270&bih=2043#imgrc=kKnl2wz6FDhssM
> >
> >
> :
> >
> > Anyhoo, my 0.02! Make it a great one!
> >
> > -Cedric
> >
> >
> > On 29 January 2018 at 09:04, nafdef <nafdef at gmail.com> wrote:
> >
> >> Thanks Bob. -FF
> >>
> >>
> >> --
> >>
> >>
> >>
> >> --------------------------------------------------------------
> >> Roger Federer Fanatic Extraordinaire :-)
> >>
> >> _______________________________________________ kwlug-disc
> >> mailing list kwlug-disc at kwlug.org
> >> http://kwlug.org/mailman/listinfo/kwlug-disc_kwlug.org
> >>
> >>
> >
> >
> >
> > _______________________________________________ kwlug-disc mailing
> > list kwlug-disc at kwlug.org
> > http://kwlug.org/mailman/listinfo/kwlug-disc_kwlug.org
> >
>
> - --
> Bob Jonkman <bjonkman at sobac.com> Phone: +1-519-635-9413
> SOBAC Microcomputer Services http://sobac.com/sobac/
> Software --- Office & Business Automation --- Consulting
> GnuPG Fngrprnt:04F7 742B 8F54 C40A E115 26C2 B912 89B0 D2CC E5EA
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2
> Comment: Ensure confidentiality, authenticity, non-repudiability
>
> iEYEARECAAYFAlpwjMoACgkQuRKJsNLM5ep0CQCfRdS2dsrIgFXjOCdyeA+YqwgC
> CG0AoPDncwEWQoQLa14g9xoxrGwVWNg5
> =jsRn
> -----END PGP SIGNATURE-----
>
> _______________________________________________
> kwlug-disc mailing list
> kwlug-disc at kwlug.org
> http://kwlug.org/mailman/listinfo/kwlug-disc_kwlug.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://kwlug.org/pipermail/kwlug-disc_kwlug.org/attachments/20180130/0e1805f7/attachment.htm>
More information about the kwlug-disc
mailing list