[kwlug-disc] fire damage to electronic equipment

[Ron Singh]

Oh man, so sorry to hear of this, Steve, glad you and your kin are
unscathed.
Similar thing happened a month ago at a brother's inlaw's house in Westvale
-- Khalid, the the house is just around the corner from your place!

If you make a claim, the insc people will just toss that equipment to a
recycler.
One possibility is to ask the claims adjuster to let *you* dispose of the
equipment.
I would not tell them of this plan however because I would think any
insurance underwriter would frown on using electrical equipment that was
subject to water/smoke damage and may deny a future insc claim in case the
future claim is a fire.
But  you try your best to get the bits working again.
Tough one.
Personally, I would go this route assuming the insc people/claims adjuster
lets you dispose of the equipment.

This is a fan fav for water/liquid dispersal:
https://www.long-mcquade.com/6205/Pro_Audio_Recording/Accessories/Hosa/DeoxIT_-_Contact_Cleaner_Rejuvenator.htm
A bit spendy, but a very effective and low(no)-residue spray.
It can be had from Amazon too for the same price, but Long-McQuade is local
and I like those folks.
There is likely a lower-cost equivalent from folks like CT or Home
Hardware, but I have never looked.

All the best Steve and reach out please in case of need.

Ron S.



On Wed, Dec 13, 2023 at 12:20 PM Steve Izma <sizma at golden.net> wrote:

> Hi folks,
>
> We had a serious fire in our house on 2 December. We lost one of
> our two cats but the rest of us are fine and living in a house
> across the street from our home. It looks like the insurance
> process is working fine in respect to most things.
>
> A lot of my computer equipment, including several laptops, a
> couple of desktops and two printers were in my office directly
> above the garage, where the fire started and was most intense. It
> turned out that the dry-walled ceiling of the garage prevented
> the upper room from catching fire, but there is considerable
> water and smoke damage.
>
> I grabbed two of my laptops before leaving the house, although
> without the power supplies, and I got my main desktop out the day
> after the fire. I cleaned the outside and used compressed air on
> all the exposed internal electronics. It didn't boot until I
> removed the NVME card, sort-of cleaned it, and re-seated it.
> I thoroughly cleaned the keyboard (an Ultimate Hackers split
> keyboard, which is easy to disassemble and clean). Just the same,
> it took me four or five days to piece together a reliable setup
> and Internet connection.
>
> Monitors in particular seem to be a problem. My newest one got
> thrown to the floor when the firefighters needed to tear open the
> ceiling looking for a hidden fire in the house's roof, and there
> is considerable water damage to anything that was on the floor
> (my main machine, under a desk, seemed unaffected by that). Over
> the first two or three days after the fire, I couldn't get any of
> the monitors to work, and the best one would turn on then rapidly
> cycle through all the settings of the monitor's menu, as if the
> touch-buttons (which I dislike anyway) were being continually
> pressed. I figured that smoke and soot had seeped in and shorted
> out the "switches". A week after that, desperately needing
> another monitor for family members, I tried it again and it
> started working as if completely unaffected by the fire. I've
> never tried to open up a modern monitor, and it appears to me
> that any cleaning would require prying the front and back pieces
> apart. Is that a worthwhile thing to try?
>
> Also, some power bricks seem not to be working, and I'm having
> difficulty determining whether cables are okay, especially USB
> and HDMI.
>
> Has anyone had experience with equipment damaged in this way? I
> could leave everything up to the insurance and restoration
> people, but I think they will tend to discard older equipment
> rather than fix those things up.
>
> I'm particularly worried about several printers I have, e.g.,
> Xerox Phaser solid-ink printers, still the best thing around for
> printing in quantity, but they've been off the market for years
> and are likely irreplaceable. They are largely mechanical (and
> thus easily cleaned and re-adjusted), but have some circuit
> boards that may need treating. Would an anti-oxidizing spray be
> worthwhile here? I haven't been able to find this at Canada
> Computers or hardware stores, but I suspect I can get it from
> Orion Electronics.
>
> Any advice here would be appreciated. And don't worry about our
> living situation, we rescued almost 200 jars of preserves that I
> had been working on since August, and quite a bit of other food;
> our neighbours filled the fridge with donations, and the house
> we've got is fully furnished. We realize that we're extremely
> lucky, especially as we follow the news about Gaza.
>
>         Thanks.
>         -- Steve
>
> --
> Steve Izma
> -
> Home: 35 Locust St., Kitchener, Ontario, Canada  N2H 1W6
> E-mail: sizma at golden.net  cellphone: 519-998-2684
>
> ==
> The most erroneous stories are those we think we know best – and
> therefore never scrutinize or question.
>     -- Stephen Jay Gould, *Full House: The Spread of Excellence
>        from Plato to Darwin*, 1996
>
> _______________________________________________
> kwlug-disc mailing list
> To unsubscribe, send an email to kwlug-disc-leave at kwlug.org
> with the subject "unsubscribe", or email
> kwlug-disc-owner at kwlug.org to contact a human being.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://kwlug.org/pipermail/kwlug-disc_kwlug.org/attachments/20231213/4df9f6f7/attachment.htm>