[kwlug-disc] In search for M2 ssd

[Ron Singh]

Anton, I should have a spare minute to pop into my office this afternoon to
see if we have some M2. SATA drives around that you can have.
That stuff is treated as e-waste by my IT guy, so no promises.
If we have any remaining, they will likely be 64G or 128G.
Let you know.

Ron S.



On Fri, Nov 29, 2024 at 1:26 PM Charles M <chaslinux at gmail.com> wrote:

> I tried multiple names drives in a slightly older HP T530 thin client
> (which only had 1 key/notch). None detected.  The moment I put a SATA M.2
> drive in (2 notches), it detected.  Hope this helps someone else.
>
> On Fri., Nov. 29, 2024, 9:28 a.m. , <peter_melse at gto.net> wrote:
>
>> I'm using a t620 plus running linux lite as a media playback device.
>> It's a little slow, but gets the job done.
>>
>> have a look at this, and see if the key type matches what you're looking
>> for. there seems to be some confusion online if nvme is supported, or if
>> it's m.2 sata only.
>>
>> https://www.dell.com/support/kbdoc/en-ca/000144170/how-to-distinguish-the-differences-between-m-2-cards
>>
>>
>> On 2024-11-28 20:25, Anton Avramov via kwlug-disc wrote:
>> > Hi Folks,
>> >
>> > So thanks to the community I have the HP t630 Thin Client working.
>> > I even installed proxmox on in and I'm planning to install at least 2
>> > virtual machines on it:
>> >
>> > 1. opnsense or similar to act as a router for my network.
>> >
>> > 2. Move my docker home assistant installation to vm there
>> >
>> > 3. Probably my asterisk setup.
>> >
>> > However I currently only have 16G M2 SSD in the machine and from what
>> > I read It would be better to not let the proxmox run out of space
>> > because it would be difficult to get out of this situation.
>> >
>> > The t630 has a second M2 slot and can accommodate another SSD there,
>> > so I was wondering if anyone has one laying around that doesn't use?
>> >
>> > Thank you very much in advance.
>> >
>> >
>> > _______________________________________________
>> > kwlug-disc mailing list
>> > To unsubscribe, send an email to kwlug-disc-leave at kwlug.org
>> > with the subject "unsubscribe", or email
>> > kwlug-disc-owner at kwlug.org to contact a human being.
>>
>> _______________________________________________
>> kwlug-disc mailing list
>> To unsubscribe, send an email to kwlug-disc-leave at kwlug.org
>> with the subject "unsubscribe", or email
>> kwlug-disc-owner at kwlug.org to contact a human being.
>>
> _______________________________________________
> kwlug-disc mailing list
> To unsubscribe, send an email to kwlug-disc-leave at kwlug.org
> with the subject "unsubscribe", or email
> kwlug-disc-owner at kwlug.org to contact a human being.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.kwlug.org/pipermail/kwlug-disc_kwlug.org/attachments/20241129/a2e69792/attachment.htm>