[kwlug-disc] In search for M2 ssd

Anton Avramov lukav at lukav.com
Fri Nov 29 14:19:07 EST 2024


Thank you very much Ron.

I was at Computer Recycling Today and Charles provided me with a working 
256Gb one.
Thank you again Charles.

I'm moving on with the project, although I later realized I should 
probably have inquired for DDR4 SODIMM ram as well :)
We'll see.

Thanks again to the hole community and Charles and Ron.

Cheers

On 2024-11-29 13:58, Ron Singh wrote:
> Anton, I should have a spare minute to pop into my office this 
> afternoon to see if we have some M2. SATA drives around that you can 
> have.
> That stuff is treated as e-waste by my IT guy, so no promises.
> If we have any remaining, they will likely be 64G or 128G.
> Let you know.
>
> Ron S.
>
>
>
> On Fri, Nov 29, 2024 at 1:26 PM Charles M <chaslinux at gmail.com> wrote:
>
>     I tried multiple names drives in a slightly older HP T530 thin
>     client (which only had 1 key/notch). None detected.  The moment I
>     put a SATA M.2 drive in (2 notches), it detected.  Hope this helps
>     someone else.
>
>     On Fri., Nov. 29, 2024, 9:28 a.m. , <peter_melse at gto.net> wrote:
>
>         I'm using a t620 plus running linux lite as a media playback
>         device.
>         It's a little slow, but gets the job done.
>
>         have a look at this, and see if the key type matches what
>         you're looking
>         for. there seems to be some confusion online if nvme is
>         supported, or if
>         it's m.2 sata only.
>         https://www.dell.com/support/kbdoc/en-ca/000144170/how-to-distinguish-the-differences-between-m-2-cards
>
>
>         On 2024-11-28 20:25, Anton Avramov via kwlug-disc wrote:
>         > Hi Folks,
>         >
>         > So thanks to the community I have the HP t630 Thin Client
>         working.
>         > I even installed proxmox on in and I'm planning to install
>         at least 2
>         > virtual machines on it:
>         >
>         > 1. opnsense or similar to act as a router for my network.
>         >
>         > 2. Move my docker home assistant installation to vm there
>         >
>         > 3. Probably my asterisk setup.
>         >
>         > However I currently only have 16G M2 SSD in the machine and
>         from what
>         > I read It would be better to not let the proxmox run out of
>         space
>         > because it would be difficult to get out of this situation.
>         >
>         > The t630 has a second M2 slot and can accommodate another
>         SSD there,
>         > so I was wondering if anyone has one laying around that
>         doesn't use?
>         >
>         > Thank you very much in advance.
>         >
>         >
>         > _______________________________________________
>         > kwlug-disc mailing list
>         > To unsubscribe, send an email to kwlug-disc-leave at kwlug.org
>         > with the subject "unsubscribe", or email
>         > kwlug-disc-owner at kwlug.org to contact a human being.
>
>         _______________________________________________
>         kwlug-disc mailing list
>         To unsubscribe, send an email to kwlug-disc-leave at kwlug.org
>         with the subject "unsubscribe", or email
>         kwlug-disc-owner at kwlug.org to contact a human being.
>
>     _______________________________________________
>     kwlug-disc mailing list
>     To unsubscribe, send an email to kwlug-disc-leave at kwlug.org
>     with the subject "unsubscribe", or email
>     kwlug-disc-owner at kwlug.org to contact a human being.
>
>
> _______________________________________________
> kwlug-disc mailing list
> To unsubscribe, send an email tokwlug-disc-leave at kwlug.org
> with the subject "unsubscribe", or email
> kwlug-disc-owner at kwlug.org  to contact a human being.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.kwlug.org/pipermail/kwlug-disc_kwlug.org/attachments/20241129/ce72e28e/attachment-0001.htm>


More information about the kwlug-disc mailing list